The threaded against press-fit argument is usually presented as a verdict, and it is not one. Both interfaces work when […]
Bottom bracket standards look chaotic because the names are marketing labels rather than descriptions. Underneath, every one of them is […]
A gear ratio is chainring teeth divided by sprocket teeth. A 50T chainring with an 11T sprocket is 4.55, so […]
The short answer: most modern Shimano road groupsets use 11T / 11T pulley wheels, and the first generation of SRAM Red and […]
The short answer is conditions. Use dry lube when it is dry, dusty or warm, because it keeps grit off […]
A bicycle cog is a toothed wheel at the rear of the drivetrain that meshes with the chain to drive […]
“Wheel upgrade” usually gets sold as one thing: a shiny new carbon wheelset. That is the most expensive answer, and […]
Independent laboratory testing measured a difference of 1.136 watts between a single pair of CyclingCeramic 11T pulley wheels and a […]
On a clean chain in a perfectly controlled lab, the gap between wax and a good oil is narrow. Independent […]
A chain that lasts a full road season often struggles to make it past spring on a gravel bike. […]
Gravel bearings work harder than road bearings. Every ride mixes water, dust, chain flex and wider load ranges than a […]